MOL Farm Grease 2MG

Смазочни греси на литиева основа

Високоефективна смазваща грес, съдържаща молибден-дисулфид и графит, специално разработена за селскостопанска техника, изложена на висок риск от изземване. Препоръчва се за смазване на лагери, съединения и болтове, предимно в отделни системи за смазване.

Applications

Equipment subject to high risk of seizure
Low speed bearings exposed to dynamic loads
Sliding parts of chassis, bogies
Screw threads, small gear wheels, springs
Individual lubrication systems

Product features	Benefits
High performance solid additive content	Solid additives increase the load-carrying properties at lubrication points, so the risk of seizure is reduced Reduces heat of friction, even in mixed lubrication conditions, so increases the service life of lubricating grease Effective wear protection even under shock loads and low speeds
Excellent wear protection	Reduced wear of contacting surfaces, even under varying operating conditions Contributes to increasing equipment lifetime
Excellent load-carrying properties	Forms a continuous lubricating film that does not break even under heavy load and low speed conditions Contributes to increasing equipment lifetime
Good mechanical and storage stability	Retains stable structure under load, so no softening of lubricating grease and no running off the lubrication point Long-term storage is possible without oil separation or lubricating grease hardening
Excellent static water resistance	No softening or runing off the lubrication point in wet, humid environments Provides reliable lubrication for equipment operating outdoors
Excellent corrosion protection	Long-term protection against surface damage, even in the presence of moisture Effectively contributes to potential reduction of maintenance costs
Excellent yellow metal compatibility	Prevents premature deterioration of non-ferrous metal parts

Правилният смазочен материал ли използвате?

Проверете!

Контакт

Техническа спецификация

Letölthető anyagok

Нива на производителност, одобрения

DIN 51502: KPF2N-25

ISO 6743-9: L-XBDEB 2

Типични свойства

Appearance	black, homogenous
Base oil viscosity at 40 ?C [mm2/s]	200
Dropping point [?C]	200
Penetration after 60 strokes at 25 ?C [0,1 mm]	280
Four ball test, weld load [N]	3000
Four ball test 60 min/400 N wear diameter [mm]	0,5
Timken OK load [kg]	20
Oxidation stability at 100 h / 100 ?C pressure drop [kPa]	25
Corrosion at 100 ?C/ 24 h (steel)	pass
Copper corrosion (100 ?C, 24 h) [grade]	1
EMCOR test, distilled water [grade]	0
Dynamic water - resistance at 79 ?C [mass %]	3
Static water resistance at 90 ?C [grade]	1-90
Oil separation [mass %]	3
Graphite content [mass %]	1
Molybdenum disulphide content [mass %]	1